Activator DP150: Our most popular 6” dewatering Pump model is the preferred pump for the Construction and Marine Industries. The DP 150 is a Self-Priming Pump using a proven and relatively simple design that has been built for endurance and efficiency. The Dp150 uses Stainless Steel for 75% of the pump parts, especially those part that experience the most strees, as the material is both longlasting and salt water resistant. The Shaft, Impeller, Stuffing Boxes are namely some of the Stainless Steel
parts on the DP 150. The DP 150uses a state of the art Duetz Germany 3 Cylinder Diesel Engine.
AET SP150 : It is a general purpose industry standard for construction, utilities and civil engineering. Centrifugal dewatering pumps are the value alternative for keeping jobsites dry. SP150 has been designed to handle the removal of relatively clean jobsite water with its self priming centrifugal pumping action. The pump is ideal for a contractor who requires temporary
water removal. SP150 incorporates the Univas vacuum system. This enables the pump to prime and re-prime fully automatically from dry. SP150 uses a state of the art Lister UK 3 cylinder engine.
ELECTRIC SUBMERSIBLE PUMPS (2” -50 mm to 6” -150mm)
Low and medium flow pumps are used extensively by Contracters, and in Agriculture for irrigation. Effecient performance and simple design make these pumps a fovorite with the user. The pumps are adaptable for use in a broad range for different applications; and provide high utilization, high return on capital, and low running cost.
Low and medium flow pumps are used extensively by Contracters, and in Agriculture for irrigation. Effecient performance and simple design make these pumps a fovorite with the user. The pumps are adaptable for use in a broad range for different applications; and provide high utilization, high return on capital, and low running cost.
Activator Pumps use Open type impeller as they are less likely to get clogged and is easier for wear & tear/damage inspection. Effciency can be maintained through impeller clearance adjustment.
Made with stainless steel material Gr316. The volute is made of a special design which allows maximum
head and discharge.
Close type impellee/ Dynamically balanced. Made in stainless steel material to withstand high corrosion.
Manufactured in stainless steel Gr 316 Material.
This is made of stainless steel that enables stability in salt water.
Activator Pumps Priming Tanks are made of stainless steel, which gives them stability in salt water. The Float
systems are also if Stainless Steel there they making them rust resistant upto 80%
Vacuum Priming by oil lubricated rotary sliding vane pump. High air handling capacity to maximize dewatering efficiency.
Activator Pumps have recently introduced a new cooling system for vacuum pump that is especially designed of the Middle East.
These new vacuum pumps use the discharged water of the dewatering pump for cooling as it exits the pump. Working temperatures are now reduced up to 50%, making them much more
efficient in comparison to regular vacuum pumps. All internal parts excluding the pump bpdy are interchangeable with regular vacuum pumps used in Middle East.
Traditional photographers use different types of film or lens filters to achieve certain color and tonal results in their photographs. They also use various tools and techniques to adjust the color and tonality of a photographic print in the darkroom. Photoshop® CS3 provides a comprehensive set of tools for making color and tonal adjustments,